Install

On the hub. Then the cab.

The film walks through the install. About five minutes for one sensor. About forty minutes for the truck. A trailer is very similar.

  1. 01Fasten the sensor bar across the hub on the existing wheel bolts with a socket.
  2. 02Use the curved fitting on one valve stem and the straight fitting on the other stem of the dual.
  3. 03Leave the sensor visible, or hide it under the chrome hub cover.
  4. 04Place the repeater inside the steering-axle wheel. Mount the receiver in the cab where the driver can see it.

Request info

Cabin display showing 104 PSI and 53 degrees Fahrenheit

The 104 PSI and 53°F figures are the reading on this screen in the film, not a product limit.

Request info